Selection guides, troubleshooting notes and technical articles. Written by the people who specify the tools, not by a content team.
Spherical pore-forming: the structure behind our ceramic wheels
Our patented pore structure, what it does at the cutting face, and where it is not the answer.
Metal bond or resin bond on a polishing line
The bond decides when a diamond grain lets go. Pick wrong and the tool either wears out or glazes.
Calibrating foamed ceramic without tearing the surface
Conventional calibrating tools plough foamed ceramic. Why our FX547-51 blade shears it instead.
Why sintered slab edges chip, and what to change first
Chipping on large slabs has a short list of causes. Most of them are not the wheel.
Gang saw segments: 1.8 mm or 3.0 mm
Kerf width is stone you pay for twice. When the thin section pays for itself, and when it does not.
Fickert polishing blocks: what the grit sequence actually does
A Fickert set is a scratch-removal chain, not six similar blocks. Why skipping a head slows the line down.